Mazda CX-5 won't remote start after installation and D-cryptor process.

Question

Evo 1 THAR-ONE-MA30 2015 Mazda CX-5.

Installation and programming went just as installation guide instruted that it would. After D-cryptor process, no remote start. Could not acess function programming. Valet button has no response. Blue LED lights with lock button from OEM remote.

Answer 1

Did you cut the yellow loop on the side of the module ? It must be cut for automatic transmission.

Comments

Yes, yellow loop is cut.

Answer 2

the evo-one will not allow function programming or remote programming if it is armed. Simply press unlock on the oem remote BEFORE attempting to do any function programming. Since you have C1 + 38.2 enabled, this will disarm the evo-one

Comments

Ok, thanks. I'll try that as soon as I can get my hands on it. This is my daughter's car, away at college.

---

The main thing I was trying to do in function programming was to see IF 38.2 was enabled.

---

Robb, I was able to try that today. It did not work. It let me into the programming mode, but did not respond after hitting the unlock button on the remote to select mode two in function 38 (3x lock button remote start). The vehicle still will not remote start.