Bypass doesn't work when remote starting car. Nissan Versa 07 + evo all

Question

Alright, so heres the deal.

Compustar 4200 (i think) and evo-all on nissan versa 2007

So I got a little bit lazy and i think its why, will wire up everything next day or two as its late and I have a truck to work on.

 

remote starter everything is wired in except for trunk unlock (was gonna do it after)

evo all - all things wired except door pin (figured the autolight shutdown wont affect much) wired via datalink

 

looking over the guide again - i missed the arm/disarm to remote starter (not sure if its needed as lock and unlock works)

 

I haven't updated the evo all but it says hardware version 6 firmware 4.18 - so it passes minimum spec

programming worked like a charm, several times

Either way - try to remote start, and no go, key works fine most of the time (trying the key directly after remote start fail wont work either but giving it a few seconds makes it fine)

Answer 1

update the evo to the latest recommended firmware, then go in the options and turn on option F2 - OP/OFA datalink. Go in the Compustar settings, and switch the datalink protocol back to default ADS.  Try this first.

As you said, you dont need the autolight wire yet as it will not affect remote starting at all. Arm-Disarm are needed to arm and disarm the factory alarm from the aftermarket remotes. If they are not connected atm, it shouldnt mattter either.

 

If it still does not work, what LEDs light up on the EVO when remote starting?

What is the service number of the EVO?