EVO-ALL does not give the status of the doors

Question

Why EVO-ALL does not give the status of the doors on the bus Data Link and analog output. Car BMW 5 E60 2006. Service No: 001A06150305. Firmware 78.01

Answer 1

Could be any reasons.

• It may simply be the wrong CAN wires.
• Try with firmware 4.18

 

Can-High	- Black -	Car Access System under driver dash, 41 pin plug, pin 35
Can-Low	- Yellow -	Car Access System under driver dash, 41 pin plug, pin 26

 

Comments

Thank you. Try firmware 4.18, CAN bus is correct because tachometer signal and control the opening - closing works, OEM remote control commands are transmitted as well, as they all work on analog signals and bus DATA LINK.