2015 NISSAN ROUGE PTS ALARM SETS OFF AFTER STARTER SHUTS DOWN

Question

T-HARNESS was used with an EVO-ALL.  After 15min run time the vehicle shuts down and the factory alarm sets off.  Is there a setting that can avoid the factory alarm triggering?

Answer 1

Hello,

What is the S/N number to the module?

Thank you.

Comments

001A06800272

---

This unit is used.

I would suggest first performing a master reset on the module in the vehicle: https://fortin.ca/en/download/61931/61931.pdf

 

Once that has been done, return to the pc and re enable the 3x lock options.

Next re program the module in the vehicle and re run dcryptor.

Then re-test remote start functionality.

 

Best regards.

---

This is the module that was initially in  the vehicle.  We had a new bypass installed w/ new flash and firmware into the vehicle on Saturday as Tech Support was unavailable.  The customer called in yesterday saying that the alarm set off still.  All components were changed. As for the 3x lock.. I will reenable the 3x lock options back this upcoming Friday but not sure if that will do anything. We had it enabled and deactivated after it was setting off alarm.

---

Ah yes, we spoke this morning on the phone.

 

As per our conversation, once you have the vehicle on hand please call into technical support so that we can troubleshoot the issue.

1-877-336-7797.

 

Best regards.