OL-RF-42-SST on Honda accord 2013 push to start.

Question

i have problem with  OL-RF-42-SST first time woked very well but when i unpluged the the wire and then i plug the wire again with evo one not working i try to program the kit again nothing happend the red led in the evo one flash but the antenna not flashing just when i plug the antenna flash 5 times then stope flashing i I tried every thing and every way possible but now the evo one not working i cant start the engine or any thing and red led under the yellow wires still going on not flashing but stay work please some help with this problem i reset the evo one same thing and now i am waiting for rest limit for the flash limet reset to program again and realy it's too much pain and time lost so please help me with fixing this problem

Answer 1

When the ignition is OFF, is the red led flashing slowly? if so, the unit is in an armed state, you will need to put it in valet mode to disarm it so that you can program remotes. 


There is no point in reseting, reflashing and reprogramming the EVO bypass side. All RF programming happens on the remote starter side of the unit.

Comments

if the red led is on with ignition off, the unit is in valet mode. To exit valet mode, turn ignition on then press the valet button 3 times, then turn ignition off. Do the remote programming after.