remote start inop

Question

Fortin Evo One 002B04 128202 AT loop not cut

2021 Nissan Versa Manual Transmission push button start

Firmware: 7.48

A1, A2, A3, A4, A7, A8, A9, A10, B1, C1, D6 are on and all others are off including special functions

RES firmware 1.25

2.1

3-1

4.1

6.1

7.1

8.1

9.1

10.1

11.1

11.4

12.1

13.2

14.2

15.1

16.5

18.1

19.1

20.6

21.1

24.1

26.1

29.1

30.1

31.1

32.1

33.1

35.1

36.2

37.1

38.2

39.2

when trying to activate (lock-lock-lock), the blue light comes on with each time the lock button is pressed and at the same time the red led next to the loop blinks rapidly.  after the lock lock lock, the red light blinks twice and then goes back to blinking rapidly

i have checked all the connectionsto make sure i did not miss anything

Answer 1

First you will need to enable option 33.2 in the remote starter.

 

then refer to Choice 3 in this guide on how to set ready mode: https://fortin.ca/en/download/87611/87611.pdf

 

Ready mode must be set every time you wish to remote start the vehicle.

Comments

Works like a charm, thank you!

is there anyway to change settings to make the vehicle shut off once the door opens instead of after closing the doors ( car thinks i forgot the car running on exit with the key in the car and beeps and does not allow doors to lock on first attempt.

thanks!

---

Unfortunately not. I will shut down on door closed.

---

thank you so much

---

Two more questions. Remote start is working perfect however parking lights do not come on when can starts and also the defrost comes on all the time even tho it's 70 degrees (F) today

---

The evo one does not do parking lights on this vehicle, it do hazard lights. They will flash at start and when the vehicle shuts down. Refer to option E5 (page 1) in the guide for description of flash pattern: https://fortin.ca/download/80221/evo-one_ig_rto_bi_nis6-kicks_pts_2018_d_80221.pdf

 

- Defrost is automatic. You can turn off option A4 in the evo and it will no longer activate with remote start. If using an rf kit you can send aux 1 (-) + Lock to manual activate or de activtae the read defrost.