Whats gone wrong here ,2019 corolla H-key with Evo all?

Question

2019 toyota corolla H-key :- installing Pro start ct-5472 tw with Evo all ; service # 001A06 634849.Firmware updated + installation guide# 62011.All connctions are good. Evo all device programmed and connected perfect.The car starts one second,then kept cranking no start.Dash-board sign BATTERY comes up (?).Evo all : RED and YELLOW leds stay on after each crank.The car is basic;without; OEM alarm,remote or TMP wire(pin 28 empty @ JB).The RS works fine with the key in igniion =no issues at all..Where am I lost track?..Thanks.

Answer 1

Turn on F3

Comments

Thanks,but didn't solve the problem.

---

SOLUTION :It might help, some one, having the same problem(if you know what you doing):Follow up the installation guide # 62011,as is,plus add this connection;You need to connect BOTH  the dis-arm wire from RS and the DARK BULE from Evo all TO (GWR) from the RS. Done successfully.

---

So connect dark blue and orange to disarm?

Answer 2

I am having the same issue with a 2018 Toyota Corolla .  Car will remote start if you use the key first but once you do that it just cranks and on second attempt it starts but immediately dies. Even tried lowering the firmware but didnt seem to make a difference