Questions & Answers

2008 Ford Edge- EVO-ALL standalone No brake shutdown

0 votes
Just finished (almost) a 2008 Edge \. EVO-ALL FORT1 XL202  everything works with the exception of the brake shutdown. After key takeover, drive, remove key EVO-ALL is still acive vehicle will not shut down without using the remote. The CANbus works for everythig else, just the brake isn't present

 

I spent an hour on the line with Moe..... he needs raise. Never solved the isue but we came up with a great work around.
posté Nov 5, 2015 dans la catégorie Ford par KOZ (750 points)
modifié Nov 5, 2015 par KOZ

1 Réponse

0 votes
I have seent this. Make sure the Can-Bus wires are Grey/Orange and violet/orange. It's possible that they are not in Pin 3 and 11 but in pin 6 and 11.  i think you already went through this with Moe though.

Option B2 should also be disabled in the options.
répondu Nov 6, 2015 par Robert T (300,020 points)
The Bus wires were correct and verified for voltage.

B2 is off.

No solution to the brake mystery tho.
...