2013 CX-5 Cranks But Won't Start M/T

Question

EVO-ONE. I have the THAR-ONE-MAZ3 harness.  White cable for clutch bypass is connected.  Not sure what's going on.  I've tried changing the programmable output from 2.1 (default) to 2.2 (I think it should be this one?) and still no luck.  It will try to crank for a few seconds, then shut off then tries again for a few seconds but won't start.  Yellow jumper was cut when I received it, but it is currently twisted together until I verify what the issue is then I'll do a more rigid connection.  I don't have the hood pin switch connected, my kit didn't come with it.  Not sure if this is preventing it from starting or not.  I have tried enabling and disabling A11 for this but still no luck with remote start. SN: 002B04 643579

Answer 1

Called tech support and fixed the issue.  So the car would remote start maybe 1/15 times.  Checked all the wiring from the harness, car battery, and everything.  Tech support told me since I got it from a retailer from eBay I should try resetting the module, re-flashing it, and then doing the key decryption again.  This solved it.  The critical part was the RESET as I tried re-flashing it before without resetting and it didn't resolve it.  Thanks Tech Support Dude!