2015 Scion xB Evo-One, no transponder

Question

Installing an Evo One for remote start with t-harness Toy1, vehicle has canbus, but is not equipped with a immobilizer system. Installed per guide #92261, but am not hung up on programming/key sense. Obviously I am going to use a different sequence because it will not get to the flashing blue led, there is no immobilizer (verified key has no transponder chip).

Is there another quide for 2015 xB with Canbus but no immobilizer?

Answer 1

Hello,

Turn off A3 in the evo-one, then program on the blue led only:

- hold prgramming button down, plug power in, let go on blue

- insert all remaining connectors

- turn key on, wait, blue will flash, turn key off, blue goes out

- module is now programmed.

Best regards.

Comments

Thanks  this worked flawlessly. Would be nice to see this as an option on the xB install guide as there's alot of them without transponders.