CANNOT ENTER PROGRAM MODE AFTER CHANGING ANTENNA FROM FMH2W TO FM3

Question

Bought a used car that came with an Evo One installed, but no remotes.  The car came with an FMH 2-W antenna.  I can get in programming mode with this setup using the valet button and get to the quick flashing blue led state.  I can do the sequence to forget the remotes and reset the settings.

I have bought a remote kit (RFK3641) that came with an FM3 antenna.  I disconnected the FMH2W and connnected the FM3 (I know it goes in a different connector on the Evo One).  With that installed, I cannot enter programming mode for the remotes.  I get the horn after turning the ignition on and holding the valet button.  Then I get the horn again after pressing the button once.  I hit the brake, but never get the quick flashing LED on the FM3 antenna.

Do I have to do anything special when changing from one model of antenna to another?

Answer 1

Hello,

What is the S/N number on the back of the evo-one? With this information I will be able to let you know if the 3 series kit can work as is or not.

Thank you.