EVO-One for 2011 Mazdaspeed 3 - Remote start starts the vehicle but immediately shutsdown after 1 second.

Question

After I put my vehicle in ready-mode for my manual, push-to-start vehicle, my car will remote start properly, however, it immediately shuts off after about 2 seconds. Parking lights don't show any indication on why it shutdowns either. What could be the issue?

I also noticed that the wiring diagram for installation have flipped wiring colors for 7A (Back Clutch Switch 2) and 7B (Front clutch switch 1). It says the Back clutch switch should have 2 cables, a WHITE and a BLACK cable, however, in reality it has a GREY and BLACK cable. Same thing with the Front clutch switch; diagram says it should have a GREY and BLACK cable but it they're WHITE and BLACK in my car... I have tried both of these wirings actually, and the problem still persists. Even if this is not the cause of the problem, which one is correct?

Answer 1

Hello,

 

Try tunring off A11 and ensure the remote starter is updated to 1.26

 

Best regards.

Comments

Yes, I've checked that A11 is set to off and that the remote starter is updated to 1.26. Still has the same problem, shutting off 2 secs after start.