ASCL6 connected BUT Evo-One not going to pairing mode

Question

2023 Subaru Forester Standard Key....Got all working now and yes needed to press a bit more on 40 pin fuse box connector So 3x works etc etc

I can NOT get the Evo-One to go into pairing mode using the ASCL6 install guide I never get the Red Led when holding button.

The ASCL6 is live as i can see the "Car" in the App BUT cant Start or unlock doors etc I can see battery and gps location

Answer 1

Hello,

- Make sure the app is set to Fortin protocol

- Make sure the "hrn-llrs-01" adapter is being used

- Plug the ascl6 into the small blue port on the evo one

- Press unlock on the OEM remote

- Ignition on press and then hold the valet button (not the programming button)

- Once the red led under the yellow loop begins to flash, release valet button and press valet 5x

- Press brake pedal once

- If the aslc6 doesnt auto pair at this point, send lock from the app. If the evo one receives the comand you will see the red led under the yellow loop blink once

 

Best regards.