Questions & Answers

2016 kia soul want to add shock sensor and glass break sensor are they compatibale with evo one

0 votes
looking to add the glass and shock sensors to evo one to get the alarm functionality out of the device,I know a shock sensor is doable have seen it on videos online. but what about a glass break sensor . I was looking at the dei 504d  and the dei 506t. The 506t has a double harness that would connect into the shock sensor and then go into the evo one unit .  

What would be the pin out to make it work and or what options would i have to enable either on the bypass side or the remote start/alarm side to make that work.
asked Mar 6, 2018 in Kia by jeff panotes (590 points)

1 Answer

0 votes
There is a dedicated port for connecting sensors to on the Evo-One, it is the black 3 pin port in between the 20 pin connector and the white 2 pin valet port.

The middle pin is the negative input and is capable accepting warn away or pre-trigger inputs. On either side is 12v and ground, Please test the polarites before connecting any sensors to make sure the pinouts match on both units.

Function 14 to mode 2  will enable the alarm feature as well as the sensor port, please wait 1 minute before testing any sensors so that the Evo unit has enabled the sensor input.
answered Mar 6, 2018 by Jesus Monroy (63,860 points)
...