Questions & Answers

Evo-fort1 standalone 2007 edge no brake shutdown, vehicle start with door keypad

0 votes
Installed EVO-FORT1 /EVOALL standalone 3x lock into a 2007 Ford Edge. Install went well, when testing noticed that vehicle will not shut down with brake pedal pressed.  Verified gray and gray/black connections to obd connector wires, are exactly as shown in diagram, color and pin position.  Ended up setting it to shut down on door open as a temporary solution.  Also, not related, but noticed that it is possible to start vehicle now by pressing 7 and 9 buttons on drivers door keypad together 3x, fob not needed. Is there a way around this so random people cannot walk by and start the vehicle? I have noticed a few other questions on this forum asking about the brake pedal not shutting vehicle down when on standalone but do not have a onclusive answer as to how to resolve te issue.  Is there a way to make this work properly? Thanks, Mike.
asked Dec 7, 2016 in Ford by Micheal Unger (2,610 points)

2 Answers

0 votes
sorry for lateness Michael.

I'm starting to wonder if brake status is simply not on the can-bus for the 2007-2008 models. There's a few GMs like that. Worst case, if ever you get another, get the vehicles brake wire, convert the (+) to a (-) with a relay, and connect it to the dark blue on the evo (hood input).

 

As for the door button presses. This is normal. They generate the same stuff on the can as the remotes. So the evo is going to detect it.
answered Dec 29, 2016 by Robert T (300,020 points)
For the keypad you can program the module to start with Lock-Unlock-Lock
0 votes
is the vehicle shutting down after you turn the key to the "ON" position then step on the brake?
answered Dec 29, 2016 by Ultra Auto Sound (4,920 points)
...