I am unable to start the vehicle with the remote of the remote starter auto page RS-620,

Question

When attempted to start the remote start with the unit remote, the Evo-all Yellow light will come on only, the car with crank but would not start. When the OEM remote, 3x lock is pressed the Evo-All red light will come on and the vehicle will start, but in order to have this Evo_ All functionality operate properly, "the Pin 6 connector relay 2 was used, COMM to the ground and NO to the remote starter instance trigger".  When the Lock/unlock from the OEM remote is pressed the blue light will turn on/off.  If you ground the Dark Blue or the Purple wire or purple/white from the 20 pins connector nothing will happen. The remote starter RS-620 and the Evo-All units would not communicate via the data link; the 12v input and ground was isolated from the alarm/remote starter unit.  I am able to start the car with the small modification that I did at pin 6 relay 2.

Answer 1

Start by turning OFF: B1, B2 and D1 in the evo-all options.