06 Silverado Evo-All with SP502, need installation guide

Question

I have a 2006 Silverado 2500HD and am installing a Evo-All with Crimestopper SP502.  Installation guide available for this setup is for Evo-All with remote start (for my vehicle).  Guide also states to upload firmware 70.32.  Using the Flashlink 4 to uploade firmware, I answered that I am installing external remote starter + alarm system.  recommended firmware is 70.18, so this is what I installed into the Evo-All unit.

Please confirm that the firmware 70.18 is correct.  Also, where can I find install schematic for Evo-All plus SP502?

My assumption is to connect Evo-All wiring per the Fortin Evo-All with remote start guide and install additional wiring from the SP502 per the SP502 guide offered by Crimestopper.  If there is no guide offered by Fortin for the Evo-All plus SP502/remote start with alarm, please confirm the above assumptions.  If I am off base, please guide me in the right direction.

Thanks in advance!

Answer 1

Firmware 70.18 is indeed correct for a 2006 chevy half ton. 

 

Here is the installation guide: https://fortin.ca/download/61111/evo-all_ig_reg_bi_gm_escalade-avalanche-silver-sierra-h2_j1850_2003-2007_a_61111.pdf

 

Specifics regarding the sp502 can be foudn in the diagram and documentation that came with the unit itself or try contacting crimestopper.