2013 Dodge Ram 1500 CAN'T PROGRAM KEY DATA INTO EVO-CHRT6 (STEP 5)

Question

Fortin EVO-CHRT6 preloaded with 74.22 build date 12/16  Installed with a T-Harness, checked wire taps with continuity, purchased the Flashlink Updater 2. Unable to get to red light from yellow in step 5 to recognize the key, I insert the key into the ignition and nothing happens (light remains yellow). Checked my lt blue wire and lt blue/black wire connections. Tested the CAN-Bus by releasing on blue and turning on the key, and the blue light flashed. Pressing lock/unlock on my remote makes the blue light flash, and when I turn on my key, the blue light stays on. After all that I updated version to recommended 74.27..reprogrammed in vehicle and still not getting red light. Do I need to run the DCryptor prior to programming in vehicle? Thanks for your help.

Answer 1

My fault...did not splice the lt blue, lt blue/ black wires to the t-harness. Had to go back to laptop to turn on remote start on options.