2008 infiniti do not start with 3x lock

Question

2008 infiniti EX 35 I installed evo-one, without t harness. programming procedure was successful. After pressing 3x lock on the lock button( while pressing, the blue LED shines), parcking lights flashes 3 times, but engine do not start (and ignition is not also). what reason is?

Answer 1

When pressing lock on the oem remote, does the blue LED flash on the module ?

Comments

Yes, I wrote that flashes...

---

3 flash of parking lights = ready mode disabled.

Have you cut the yellow loop on the module? This is assuming the vehicle is automatic transmission.

---

The chart is not written in diagram on the web-site, that it is necessary to cut the loop. After your answer, I read the instructions evo-one and there it is written. I'll try and write the result..
Thanks.

---

Everything is OK...Thank you very much...                           

I'm still asking how to program precisely evo-all (+ int-bmw2) on the 2008 BMW X5. Whether you can answer on this?

---

int-bmw2 installation guide: http://fortin.ca/download/24901/int-bmw_v2_revd20160318.pdf

Evo-All installation guide which includes the programming procedure on page 5: http://fortin.ca/download/4371/evo-all_bmw_mini_cahierd20120427.pdf

---

Here it is drawn mechanical ignition switch and written,

"Turn the ignition ON / RUN position"... and, our car with push-to-start..(?)

---

so simply push to PTS button and turn the ignition to the on position...same thing as a key model but just push the button instead.

---

Thank you. I live in Georgia. in our country only I know about Fortin (learned from the Internet). not so cold in our country. and, few customers