Remote 642w not working after successful pairing,but works from OEM remote

Question

Installed new remote 642w and successfully paired with evo one module, but not working at all . Option for this remote H2 is on . Evo one works fine from OEM remote. What others hidden problems can be? It's for 2013 vw Passat. Thank you for replying!

Answer 1

Were did you plug the antenna into on the evo one?

 

What pairing procedure did you follow to pair the 64-2 remotes to the evo one?

Comments

I have that-vw6 wiring and also bought with this remote adapter fr-A2a ,everything was plugged correctly., there no other way to do it,like I said evo one accepted both remotes ,but they don't do anything . I followed instructions on web site fortin.ca for this remote. If I change in programming of evo one option H2 to H1 remote only open doors and nothing else no matter what button on remote you press.if I change it back to option H2 like manual telling,then remote don't even respond

---

If you are using an evo-one, the rfa2a adapter is not needed. the antenna should be connected directly into the small BLUE port on the side of the evo-one.

 

H2 only exists on evo-all, are you sure you have an evo-one? What is the s/n number on the back of the module?

---

My apology it's evo all.s/n001A07224770.

---

Please turn off option A14 and option B2.

 

Once that is done re pair the rf kit to the evo-all and re test (pages 3&4). When you pair the remote make sure blue & red blink on the evo after each remote.

 

https://fortin.ca/download/25431/rf642w-install-guide-25431.pdf

 

If you are still having issues after this please contact technical support directly so we can walk you through the pairing procedure.

 

1-877-336-7797

---

Thank you so much! It did work for me. Blessings!!!

---

Glad you got it going.

 

Best regards.