Questions & Answers

2020 Sierra 1500

0 votes
Just wondering when the update for the 2020 Sierra will be available ? Is it the same that the 2019 ? It looks the same for the wiring but not sure for the firmware.

Thanks
asked Jun 6, 2020 in FAQ by Jerome Thomassin (2,450 points)

1 Answer

0 votes
There is a slight change in 2020. Firmware is in testing phase and will be out soon.
answered Jun 9, 2020 by Mathieu Bertrand Collin2 (62,060 points)
Thanks !!
commented Jun 10, 2020 by Jerome Thomassin (2,450 points)
Hi! I saw on the installing guide of the 2019 Sierra 1500 , that now it's written 2019-2020 and that 70.40 firmware should be used, but on the Flashlink Manager only the 70.39 is available for now... mistake or just because the firmware is not ready yet?
 

Thanks, just to give an answer to my customer
commented Jun 30, 2020 by Jerome Thomassin (2,450 points)
Choose "View other firmwares", 70.40 is there.
commented Jul 1, 2020 by Robert T (301,790 points)
Thats what I did, it wasnt there the other day, Ill recheck anyway.

 

thanks !!
commented Jul 2, 2020 by Jerome Thomassin (2,450 points)
Note, latest firmwares are only available on modules with a QR code.
commented Jul 2, 2020 by Robert T (301,790 points)
Just tested it today on my customer 2020 Sierra 1500 Standard-Key, and it won't go over programming, I've reset the module a couple time, flash the firmware to 70.40, went in truck to program and after the 5 flash on yellow led and static yellow, turn the key On and it won't do anything else than yellow/red flashing 1x per second .

 

S/N : 001A07 111727

Evo-All is brand new , I've made like 5-6 firmware flash because of testing, could the module flash limit be reset please ? Since it's only been done for testing

 

Thanks
commented Jul 11, 2020 by Jerome Thomassin (2,450 points)
Also I forgot to mention, engine of the truck is the I4 2.7L Turbo gasoline engine, could it be different from the classic 4.8L or 5.3L V8 ? Thanks again
commented Jul 13, 2020 by Jerome Thomassin (2,450 points)

went in truck to program and after the 5 flash on yellow led and static yellow, turn the key On and it won't do anything else than yellow/red flashing 1x per second .

Plug in only red connector, start the car for a couple of seconds, shut it down, leave the red connector connected then program the module. 

commented Jul 14, 2020 by Robert T (301,790 points)
Already done that according to your troubleshooting guide, same situation occur...
commented Jul 14, 2020 by Jerome Thomassin (2,450 points)
Once the car is shut down, leave the red connector connected to the module, wait 20-30sec, then attempt programming.

 

If problem persists, please call.. 1-877-336-7797
commented Jul 14, 2020 by Robert T (301,790 points)

Related questions

...