Evo-ALL + 2002 Toyota Sienna bypass wont program

Question

I am attemping to install a ProStart 2-Way LCD Remote Starter, 6-Button onto a Toyota Sienna 2002 with Fortin EVO-ALL bypass module. I have made all the necessary connections to the remote starter, programmed successfully; doors, locking, unlock worked. Now I believe, my problem lies within the EVO-ALL bypass. I followed this guide: http://fortin.ca/download/5801/evo-all_toyotalexus_regconfig_cahierd20120813.pdf (connection 2, program 1) posted on the fortin website. When I went to program the bypass module it stayed at the red solid LED and would not flash red rapidly for 10 secs. My questions are:

1. The remote starter in the mode 4 function 4, it has 3 options: 1- way ADS (D2D), 2-way XpressKIT (D2D) and 1-way Fortin(D2D). So now, which one should I select? . I've try using 1-way D2D mode in the remote starter and hardwiring the bypass data link wires (red to +12V and black to ground(-)) and still doesn't programmed. I also tried switching the option to 2-way XpressKIT, bypass wont program.

2. Following the above question, would I need to use a flash link manager to change my Fortin bypass to Fortin2 (2-way D2D)? Is this an option?

3. The guide doesn't state that this vehicle need to connect the 5 pin CAN BUS connector. Am I correct?

4. What can I possibly do to resolve this?

Thanks, 

Answer 1

What is the service number to the module?

Comments

Fortin Evo-ALL

Service # 001A06 581831

Hardware Vr. 6

Firmware Vr. 4.18

 

Autostart

Model # CT4311TW Version: H7.0 V6.2

---

The unit is currently set up for a 2016 Nissan pathfinder push-to-start.

This can be seen here: http://fortin.ca/en/support/001A06581831/

 

Please flash the correct firmware into the module and select the proper year make and model

---

ok thank you very much, waiting for the flash link updater to arrive then will get back to you

---

Thank you so much derek bypass programmed and is working.  You are a life saver!

Glad to have ppl like you to help us, much is appreciated

---

Happy to help!