2016 Mazda CX-9

Question

Installing an Evo One with a THAR-ONE-MAX3.  Programming goes through smoothly, decrpyts on the Flashlink fine, re-install, and remote start will not function.  I have tried resetting the bypass and decrypting multiple times, checked to insure it is not in valet mode, and re-updated the firmware for both bypass and remote start twice before reinstalling to only get the same result.  I have also tried lock, lock, lock and lock, unlock, lock, all times and neither works.  

 

I have not hooked up tail lights or pin switch as they are supposed to be controlled by data bus.  If this is wrong please let me know.

Answer 1

WHat is the service number on the module ?

Comments

S/N is 002804 028273

---

Also, is there a way to master reset from scratch on these other than the 23 pushes on valet for remote start and button reset for bypass?