Evo-for4 plug and play

Question

What wires do I need to connect using evo-for4 for a 2013 Ford Explorer. I was told it was completely plug and play. I’ve look at the wire diagrams and I’ve gotten multiple different answers

Answer 1

If you only need 3x lock remote start the only wire connected need to be Yellow from the 20pin connector to purple/yellow from the tharness.

Comments

Thanks! I figured it out! I appreciate your help. I installed it in 20min yesterday!

---

i did exactly same on my 2013 for explorer it completes programing but wont start.The ignition comes on , it says system start fault on screen , gives two more tries and then red led flashes 3 times.any ideas will be much appericiated.