2017 SQ5 Evo-All do not run

Question

Hi,

I have install Fortin Evo-audt1 on my audi sq5 2017 but doesn't work. I have connect foot brake wire, Can H & Can L under steering column also I tried under hood clutch and  harness on key port. I did the program but on the 8th step doesn't flash red and yellow light, only 3x red light. I try to remote start but nothing happen. if i put the key on key port the remote starter works. SN 001A07 481140. VIN:WA1CCAFP3HA009841.

Can you help what can I do?

Answer 1

Hello,

Is the vehicle automatic or manual tranmission? I ask becasue you mentioned a clutch in your question.

 

Best regards.

Comments

No its automatic transmissiom

---

You are following the wrong programming. You should only be programming on the BLUE led as shown on page 6.

https://fortin.ca/download/72821/EVO-ALL_IG_SAL_BI_AUD-A4-A5-Q5-S4-S5_2015_PTS_KW_A_72821.pdf

 

Also this vehicle requires you to sacrifice a key for remote start.

 

Best regards.

---

Okay... can I sacrifice e key with thor aud1 t harnes?

---

No, you cannot use the audt1, is not listed nor supported on the 2017 sq5.

https://fortin.ca/en/vehicles/audi/sq5/2017-key-port/compatibility/

---

I think evo all its alright for this car?

---

Yes, evo all is fine.

---

Thank you very much I appreciate...

I am in Connecticut USA, how many days need to be here the remote kit?

---

I have no idea. I do not sell Fortin products, I am tech support.