Evo one 05 jeep liberty

Question

I have a evo one, and an 05 jeep liberty but i dont see it as compatible. Is that for all functions or i can i use it for the remote starter? Other than software issues i dont see why i couldnt use the remote start as long as the remotes are programmed

Answer 1

Hello,

 

The reason it is not listed is because the firmware needed (4.06) does not exist for evo-one. You could try evo-one with fw 74.22 but there are 0 gurantee's that it will work as it was never ofifcally tested on those older jeeps.

You would follow the same in vehicle bypass wiring and programming that is shown in the evo all guide (page 5 & 7): https://fortin.ca/download/9501/EVO-ALL_ChryslerDodgeJeep_cahierV2K20130527.pdf except instead of insertting the data link at the start of programming, you would insert the main 6 pin high current connector.

 

Keep in mind the evo-all guide only shows the bypass porition, you would be respondible for finding and wiring the rest of the installation.
 

Best regards.

Comments

So ignition, wouldnt match in the guide, but what about if i used it as a standalone. And left the transponder key in the ignition, or got one of those boxes that holds the key and sends the signal?